What Is A Plate Roll Machine?

What Is A Plate Roll Machine?


plate roll machine is used to roll steel. These machines are rated based on the yield strength of the base material. Mild steel, for example, yields approximately 48,000 to 58,000 PSI. Manufacturers can provide tables that compare yield strength to capacity. If you’re interested in purchasing a plate roll machine, you should know what to look for.


There are different types of plate roll machines. Some are automatic, while others are manual. Manual machines usually have a large amount of power to move the rolls. They often use an AC motor as their driving control part. Manual machines have poor machining efficiency and accuracy. CNC-controlled machines are the best choice for high-volume production runs.


Plate rolling machines can be categorized according to their capacity and their features. Plate roll machines often perform both rolling and prebending operations. Prebending is a process where the roll bends the sheet at its leading edge and trailing edge, as well as the seam. It is a powerful process that reduces the amount of unbent flat.


A plate roll machine is a piece of equipment that uses rollers to bend flat metal sheets. The upper roller moves in one direction while the lower roller rotates. The friction between the roller and the plate controls the thickness and diameter of the rolled sheet. The machine also has several accessories to help with the bending process.

Functions of a plate roll machine:

A plate roll machine is a device used to process sheet metal. It consists of three parallel steel rollers arranged in a triangle at each end. As the sheet metal passes between the lower and upper roller, it undergoes a radial curvature, which depends on the three rollers’ mutual positions. The radius of curvature is greater when the rollers are farther away from one another and smaller when they are closer together.

Mechanisms of a plate roll machine:

The rollers should be properly lubricated to make the plate roll process successful. The oil distribution plate is 3.6 mm deep and 3.2 mm wide. The 3.0 O-ring has a small gap for compression, and the 1.4 planes retaining ring is firmly placed in the groove. The MH series machines are built with welded steel and European quality materials and are equipped with hydraulic and CNC playback systems for pre-bending precision.